Recently, we were asked if CAPLINQ supplied a tape with the following specifications: Adhesive: 17um Silicone adhesive Polyimide Backing Carrier: 25um Polyimide Adhesive: 17um Silicone adhesive Release liner: Paper or […]
CAPLINQ is pleased to announce PET1S, its newest polyester tape introduction designed as a plating tape. LINQTAPE™ PET1S-Series Polyester Plating Tape is a 1 mil polyester backing film coated with […]
CAPLINQ is pleased to announce PIT2S-RL, its newest polyimide tape introduction designed as a no-residue High Temperature Mounting Tape on PET Release Liner. LINQTAPE™ PIT2S-RL-Series Polyimide Tape is a high-temperature […]
In an earlier post, we asked this question, but it’s come back again and again, so we want to address again, in more detail, and with an aim for discussion. […]
In tests carried out by both the University of Kentucky and Princeton University, Dielectric Barrier Discharge (DBD) Plasma Actuators have been used as an effective active flow control device. CAPLINQ […]
Many customers have requested whether CAPLINQ can offer thinner polyimide tapes. CAPLINQ is pleased to announce LINQTAPE PIT0.5S a 0.5mil (13 micron) Polyimide Film with a 1mil (25 micron) silicone […]
CAPLINQ LINQTAPE Polyimide Film can be used to sputter metals, including precious metals like Gold (Au) and Titanium (Ti). This may be done for various reasons including: Sputtering metals on […]
Questions and answers concerning LINQTAPE Polyimide Film and Tape
